KA-DP14 Ceiling Flush Mount Microwave Sensor Specifications:

1) Power Sourcing: 220-240V/AC                        
2) Power Frequency: 50Hz                       
3) HF System: 5.8GHz CW radar, ISM band               
4) Detection Range: 360°
5) Ambient Light: <3-2000LUX (adjustable)               
6) Installing Height: 1.5~3.5m
7) Rated Load: 1200W (incandescent lamp)               
                           300W (energy-saving lamp)              
8) Time-Delay: min.:10sec±3sec
                            Max.: 12min±1min
9) Power Consumption: approx 0.9W                                  
10) Detection Distance: 1-8m (radius) adjustable            
11) Detection Motion Speed: 0.6~1.5m/s
12) Transmission Power: <10mW
13) Installation Type: Ceiling Flush Mount Installation

KA-DP14 microwave sensor introduction:

The product is a new saving-energy switch; it adopts microwave sensor mould with high-frequency electro-magnetic wave (5.8GHz), integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The
wide detection field is consisting of detectors. It works by receiving human motion. When one enters the detection field, it can start the load at once and identify automatically day and night. Its installation is very convenient and its using is very wide.
Detection is possible through doors, panes of glass or thin walls.

KA-DP14 Function:

1) Can identify day and night: It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.

2) SENS adjustable: It can be adjusted according to using location; low sensitivity with 1m for detection distance; High sensitivity with 8m, it fits for large room.

3) Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.

4) Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 12min±1min.

KA-DP14 Actual Image:

The delaying time, ambient lux and detection distance is adjustable:

The backside view of KA-DP14: